Honeywell CO60PM Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 16)

ENG CLEANING & MAINTENANCE

Water Drain

Plug

Open Screws

Cleaning The Honeycomb Cooling Media

Draning and Cleaning The Water Tank

•

The air cooler is now ready to be used. This cleaning process should be repeated monthly to

maintain the integrity of the unit and to remove particles filtered from the air.

Turn the power “off” and disconnect the air cooler from the power supply.

Move the unit to a location where it can be drained.

Remove the drain plug and allow the tank to empty(#12 on Page 8).

Refill the water tank up to the maximum level with clean water and drain

it completely.

Fill water tank and rinse at least 2-3 times before use.

After cleaning ensure that the drain plug is back in place.

•

Plug into the power supply and turn on unit.

Turn off the unit, and unplug the power cord from wall

outlet.

Rotate the unit facing the back panel, and locate the Rear

Grill Removal Screws (#12 on Page 8). Remove the 4

screws with a screw driver.

Pull the rear grill panel, until it is completely

•

This cooler has Honeycomb cooling media on the right and

left panels. The cleaning and removal procedure is the same

as rear panel.

removed.

Plug into the power supply and turn on unit.

The Honeycomb cooling media can now be seen. Clean

honeycomb with clean cloth to remove all the dust &

dirt particles.

Once cleaning is finished, reassemble the unit.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Keine Kommentare

Honeywell CO60PM Gebrauchs- und Pflegehandbuch Seite 16