Honeywell CT50A Bedienungsanleitung PDF herunterladen (Seite 3)

CT50A, CT51A, CT53A THERMOSTATS

3 69-0265ES

THERMOSTAT OPERATION

! On the CT51A, the system switch controls as follows:

HEAT—heating system only operates.

OFF—heating and cooling systems are disconnected.

COOL—cooling system only operates.

! The fan switch controls as follows:

AUTO—fan on when heating or cooling system

operates.

ON—fan operates continuously.

NOTE: In the following instruction, disregard cooling

directions if not applicable to your system.

! Turn on power to the heating/cooling system.

! Observe system operation for at least one cycle on

both heating and cooling.

! To observe: Place the system switch at HEAT position

and fan switch at AUTO.

! Move the temperature sensing lever to 10

° F (6° C)

above room temperature. The furnace should turn on.

A short warm-up period may be required before the

system fan turns on.

! Place system switch at COOL position and move

temperature sensing lever 10

° F (6°C) below room

temperature. The cooling equipment should turn on

and the system fan should turn on.

NOTE: Some systems have a time delay that can pre-

vent operation up to 5 minutes.

! Turn the fan switch to ON. The system fan should turn

on, and operate continuously. The fan should continue

to operate at any system switch or thermostat setting.

1 2 3 4 5 6 7 8

Keine Kommentare

Honeywell CT50A Bedienungsanleitung Seite 3